Previous image
Berger SGS100 or SGG100 Retrofit Snowguards
Next image
Zoom image

Berger SGS100 or SGG100 Retrofit Snowguards


Not rated yet

Berger 100 retrofit stainless steel or galvanized snow guards (14 inch maximum reach to nail). High quality, durable stainless steel retrofit snow guards for installation on existing or new roofs. Or, if you want real economy, buy the galvanized model.

  • $6.75
Qty:  
  • Weight
    0.8 lbs
  • SKU
    105
For installing on existing slate or asphalt shingle roofs. Stainless steel or galvanized snow guards. High quality, durable stainless steel retrofit snow guards for installation on existing or new roofs (stainless steel is one of the strongest metals with a very high tensile strength). Or, if you want real economy, buy the galvanized model.
 


 
 
NOTE: Returned Berger snowguards require a 25% restocking fee, so make sure you're getting the right ones!
 
 
We also have these in a reinforced style.

Berger has over 100 years of experience in manufacturing one of the most complete lines of snow retention products with a guard to fit nearly any type of roofing & budget, including slate.

Snow guards should be installed where the potential for the sudden sliding of ice and snow can be hazardous to people or property below. Falling snow is a life safety issue, and careful consideration of liability issues should be part of a carefully designed roof system in all areas prone to winter snow and ice.

The following recommendation is for a typical application, slate size 12 inches x 18 inches, with a 7 1/2 inch exposure, and a roof pitch of 12/12 (45 degrees). This is a typical example, and can be used and adjusted for differing conditions such as high snow loads, or drifting conditions. For this example, the rafter length is 18 feet.


Guards shall be installed in horizontal rows parallel to the eave. The first row shall be installed on the third course of slate, and spaced no more than 24 inches apart in the rows. Subsequent rows shall be spaced 30 inches vertically (4th slate course) and the guards offset 12 inches from the course below. Install 6 horizontal rows. The preceding technical information is for informational purposes only and is not intended to replace the manufacturer's recommendations for a particular project. We will provide layouts upon receipt of roof plan with elevations. Manufacturer is not responsible for improper installation, or installation in insufficient quantities.

GENERAL INSTALLATION GUIDELINES
 
 
ONLINE SNOWGUARD LAYOUT REQUEST 

CAD DRAWING

DOWNLOAD OUR SNOWGUARD CATALOG

IMPORTANT NOTE ABOUT SHIPPING RATES: We often can ship snowguards free when there is sufficient quantity! In any case, for an accurate shipping cost for snowguards, please call us at 814-786-9085 (M-F, 9-5, eastern time, USA), or send us an email and include the item, quantity, "ship to" zip code, and type of UPS shipping method such as UPS ground. 
  • Manufacturer
    Berger Snow Guards
  • Metal Type
    SGS100 Stainless Steel, SGG100 Galvanized Steel
Customer reviews
Please sign in to add review
There are no comments yet. Be the first to leave a comment
Related products
Drop items here to shop
Product has been added to your cart
  • Drag and drop me to the cart

    Not rated yet
    • $7.50
  • Drag and drop me to the cart

    Not rated yet
    • $12.99
  • Drag and drop me to the cart

    Not rated yet
    • $11.99
  • Drag and drop me to the cart

    Not rated yet
    • $13.99
  • Drag and drop me to the cart

    Not rated yet
    • $12.50
  • Drag and drop me to the cart

    Not rated yet
    • $11.99
  • Drag and drop me to the cart

    Not rated yet
    • $12.99
  • Drag and drop me to the cart

    Not rated yet
    • $8.75