Berger SG1 Snowguards

Berger SG1 Cast Aluminum Snow Guards for Standing Seam Roofs are available in Mill Finish (SG-1MF), or with an Epoxy Primer (SG-1EBK). They are also available in polished bronze. These non-penetrating devices are for traditional double-lock standing seam roofs 1.0 inch deep x 3/16 wide at the bottom and 5/16 inch wide at the top (see CAD below). They fit both 1 inch and 1-1/2 inch high seams. The symmetrical design rotates 180 degrees to match seam lock orientation.

The set screws are stainless steel so these snow guards can be used with any type of metal roof.

Options Available:

SG-1MF: Mill  Finished Aluminum - "Mill Finish" is the natural appearance of the  aluminum as it comes from the rolling mill or the extrusion mill. It is "as is" with no external mechanical or chemical finishing.
SG-1EBK: E-Coat Epoxy Primer (Medium Gloss Black) - requires a final color coat after purchase.

SG-1PBZ: Polished Bronze - Polished Bronze is a non-stock, special order (no cancels or returns). Requires an extended lead time.

  • $16.00
Qty:  
Not rated yet

NOTE: Returned Berger snowguards require a 25% restocking fee, so make sure you're getting the right ones!

IMPORTANT NOTE ABOUT SHIPPING RATES: We often can ship snowguards free when there is sufficient quantity! In any case, for an accurate shipping cost for snowguards, please call us at 814-786-9085 (M-F, 9-5, eastern time, USA), or send us an email  and include the item, quantity, "ship to" zip code, and type of UPS shipping method such as UPS ground.
 
    • Weight
      0.75 lbs
    • SKU
      SGSG1MF
  • Manufacturer
    Berger
  • Finish Type
    SG-1MF Mill Finish Aluminum, SG-1EBK Aluminum/Epoxy Primer, SG-1PBZ Polished Bronze
Customer reviews
There are no comments yet. Be the first to leave a comment
Please sign in to add review

Related products