Tile Roofs

We sell a variety of snow guards and roof snow retention devices specifically made for ceramic tile roofs, either for new construction or on existing roofs (retrofit). We have the largest selection of snowguards and rails on the internet!
Items: 113 of 13, per page
Drop items here to shop
Product has been added to your cart
  • Drag and drop me to the cart
    Berger Brothers Model #SG2 heavy duty snow guard available in bronze (SGBR2) or galvanized iron (SGML2). Five inches wide, 2 3/4 inches high. The riveted bar is 1/8 inches x 1 inch x 12 inches long and goes 8 inches under the slate. When installing, the underlying slate is notched to allow for the snow guard strap. 

    These snow guards are also suited for wood shake, tile, and mineral surfaced  shingles. Excellent in areas that receive heavy snows! This snow guard is to be installed during the slate roof installation - it is not a retrofit model.

    Snow guards should be installed where the potential for the sudden sliding of ice and snow can be hazardous to people or property below. Falling snow is a life safety issue, and careful consideration of liability issues should be part of a carefully designed roof system in all areas prone to winter snow and ice.
    • $11.50

    Not rated yet
  • Drag and drop me to the cart

    An innovative snow guard designed specifically for smaller concrete and clay tiles. Looks great on the roof and is available in Kynar-coated aluminum or in copper.

    Clip Style Snow Guard

    • Length: 11 1/2 Inches
    • Width: 2 3/8 Inches
    • Weight: 1.9 Ounces


    Designed to be installed on new and existing:

    • Concrete and Clay Tile Roofs


    Available in:

    • Copper (all snow guard components are 16 ounce copper)
    • Kynar-Coated Aluminum in Liberty Gray or Dark Bronze as shown at left (all snow guard components are .032 aluminum)
    • Powder  Coated Aluminum. There is a $2.00 per snow guard charge for the powder coating. See color chart below. You will need to call (814) 786-9085 to order specific color. Lead time for powder coating and fabrication is approximately 2 weeks.


    • $5.75

    Not rated yet
  • Drag and drop me to the cart

    Innovative snow guard designed specifically for concrete and clay tiles. Looks great on the roof and is available in Kynar-coated aluminum or in copper.

    Clip Style Snow Guard

    • Length: 11 1/2 Inches
    • Width: 2 3/8 Inches
    • Weight: 1.9 Ounces

    Designed to be installed on new concrete and clay tile roofs from:

    • Westile
    • Boral
    • Monier
    • Lifetile
    • Eagle
    • Pioneer
    • Hansen

    Available in:

    • Copper (all snow guard components are 16 ounce copper)
    • Kynar-Coated Aluminum in Liberty Gray or Dark Bronze (all snow guard components are .032 aluminum)
    • Powder Coated Aluminum. There is a $2.00 per snow guard charge for the powder coating. See color chart below. Please call (814) 786-9085 to order a specific color. Lead time for powder coating and fabrication is approximately 2 weeks.


    • $5.75

    Not rated yet
  • Drag and drop me to the cart

    Snow Guard designed for installation on new and existing concrete tile roofs. Available in Powder Coated Steel and Copper.

    Clip Style Snow Guard

    • Length: 16 1/8 Inches
    • Width: 1 3/4 Inches
    • Weight: 12.1 Ounces
    • Reach 12 1/4 Inches

    Designed for installation on:

    • Concrete and Clay Tile

    Available in:

    • Copper (all snow guard components are 16 ounce copper)
    • Powder Coated Steel. We keep Liberty Gray, or Dark Bronze in stock. All other colors will have a longer lead time. Color chart can be seen below. Please call (814) 786-9085 to order a specific color. Lead time for powder coating and fabrication is approximately 2 weeks.

    We have fasteners for installing snowguards.

    • $7.25

    Not rated yet
  • Drag and drop me to the cart

    Gough English Tile SnowGuard Model SGBK. Designed to be installed on new and existing English tile roofs. This Snow Guard is made of 24 ounce cold rolled copper. The upper strap is 32 ounce cold rolled copper. 

    It is fitted close to the tile so as not to  hold-up the row of tile above it. It includes two vertical pedestals of  double 24 ounce copper making it the strongest, most stable, snow guard  on the market. The wide, flat copper base allows the guard to hug close to the tile. It's medium height provides stability. 

    It weighs 5.7  ounces, is 8 3/4 inches long,  has a 3 1/4 inch wide face, and protrudes up from roof about 1 3/8 inches. Also available in lead coated copper or powder-coated at additional cost. Custom sizes are available as well.


    This item requires at least one week lead time and is non-returnable.
    • $14.99

    Not rated yet
  • Drag and drop me to the cart
    Gough Spanish Tile SnowGuard Model #SGSP. Designed to be installed on new and existing Spanish tile roofs. This Snow Guard is made of 24 ounce cold rolled copper. The flat copper base  allows the guard to hug close to the tile. 

    It weighs 5 ounces, is 8 1/2  inches long, has a 3 1/4 inch wide face, and protrudes up from roof about 2 1/8 inches. Also available in lead coated copper or powder-coated at additional cost. Custom sizes are available as well.

    This item requires at least one week lead time and is non-returnable.

    If you need a longer snowguard, we also have the SGSP+3, which is 3 inches longer (select option below).
    • $12.99

    Not rated yet
  • Drag and drop me to the cart
    Mullane 200CPT retrofit for tile roofs. Designed to be installed on existing tile roofs.


    Snow  guards should be installed where the potential for the sudden sliding of  ice and snow can be hazardous to people or property below. Falling snow  is a life safety issue, and careful consideration of liability issues  should be part of a carefully designed roof system in all areas prone to  winter snow and ice.

    All BRONZE GUARD® products are cast in pure  tin bronze, using only virgin metals to assure the highest quality  alloy. The castings are produced locally by old-world craftsmen using  state of the art equipment to assure that each casting is of consistent  quality. The final assembly is done by hand, using only solid copper  rivets, so that each finished product is of uniform quality.

    • $17.00

    Not rated yet
  • Drag and drop me to the cart

    Select for 2 or 3 pipes and shorter or longer Spanish Tiles below. The long and short brackets match the Ludowici short and long Spanish tiles: Short = 12 3/4 inches to 13 inches; Long = 18 inches.

    This item is a  special order item that requires a 4-8 week lead time. Since this  product is made to order it is non returnable and non refundable.

    • $186.00

    Not rated yet
  • Drag and drop me to the cart

    R532 3-Pipe Bronze Bracket for Spanish Tile. The brackets match the Ludowici short Spanish tiles: Short = 12 3/4 inches to 13 inches.

    This item is a  special order item that requires a 4-8 week lead time. Since this  product is made to order it is non-returnable and non-refundable. You  may need to send a sample piece of tile so we can make sure the match is  exact.

    • $354.10

    Not rated yet
  • Drag and drop me to the cart

    Fitrite #631 3-pipe Aluminum Alloy Snow Fence Bracket for French Tile

    This item is a special order item that requires a 4-8 week lead time. Since this  product is made to order it is non-returnable and non-refundable. You may need to send a sample piece of tile so we can make sure the match is  exact.

    • $198.50

    Not rated yet
  • Drag and drop me to the cart

    Fitrite #632 3-pipe bronze snow fence bracket for French Tile

    This item is a  special order item that requires a 4-8 week lead time. Since this  product is made to order it is non-returnable and non-refundable. You  may need to send a sample piece of tile so we can make sure the match is  exact.

    • $351.00

    Not rated yet
  • Drag and drop me to the cart

    Fitrite #831 3-pipe aluminum alloy snow fence bracket for Designer Tile.

    Also available in bronze.

    This item is a  special order item that requires a 4-6 week lead time. Since this  product is made to order it is non-returnable and non-refundable. You  may need to send a sample piece of tile so we can make sure the match is  exact.

    • $220.30

    Not rated yet
  • Drag and drop me to the cart

    Fitrite #832 3-pipe bronze snow fence bracket for Designer Tile. There is also a smaller version of this bracket. Please call us with your measurements. 814-786-9085 M-F, 9-5, Eastern.

    Also available in aluminum.

    This item is a  special order item that requires a 4-8 week lead time. Since this  product is made to order it is non-returnable and non-refundable.  You  may need to send a sample piece of tile so we can make sure the match is  exact.

    • $510.10

    Not rated yet