Standing Seams

We sell a variety of snow guards and roof snow retention devices specifically made for standing seam roofs, either for new construction or on existing roofs (retrofit). We have the largest selection of snowguards and rails on the internet!


Items: 114 of 14, per page
Drop items here to shop
Product has been added to your cart
  • Drag and drop me to the cart
    • Cast Aluminum
    • 1/4 inch wide slot
    • Suitable for seams 1.5 high inch or less
    • 24 gauge or lighter metal
    • Can be used on double-locked seams or seams that have been crimped over at installation point by a professional installer/roofer.
    • SS1A: Mill finish
    • SS1SC: Powder-coated Medium Bronze, Charcoal Gray or Hunter Green Model.
    • Custom: Custom colors for large custom orders with a longer lead time.
    • Select options below.
    • $12.99

    Not rated yet
  • Drag and drop me to the cart

    Berger SGBR1/SGML1 Heavy Duty for Standing Seam Roofs, available in bronze (shown) or for less money in galvanized iron. Select the metal type below for price adjustment.

    The  roofer's choice since 1883 for use on standing seam metal roofs! It  weighs 5 1/2 ounces. It stands 2 3/4 inches high off of the roof and is 5  inches wide.They're pinched to clamp on top of the seam to create a  rigid, permanent job. You may need the Double Welt Iron to  hold the seam in place as you crimp the snow guard together (a sledge hammer head can work too). The gap  that fits over the seam is 1/4 inch wide.  If your seam is thicker than  that, this snow guard probably is not the best choice. For a thicker  seam, try the Berger AP Aluminum Snow Guards.

    • $14.50

    Not rated yet
  • Drag and drop me to the cart

    Berger AP snow guards are non-penetrating mill finish aluminum devices which have been engineered specifically for use with more popular structural and non-structural pre-formed and architectural metal roof systems. They're secured without glues or sealants, utilizing custom milled stainless steel set screws to clamp them in place. They're produced in cast aluminum and are available in two different seam widths and heights for the same price, and can be custom painted (see below).

    AP400: Seams up to 3/8 inch Thick & 1 1/2 inches High
    AP516: Seams up to 1/2 inch Thick & 1 1/2 inches High

    They do not restrict thermal movement. The deep throats permit it to be  secured directly without damaging caps or compressing internal gasketing or sealant pockets. The wide, deep blade design makes it particularly effective in retaining snow with the higher seams and wider panel widths  common in pre-formed architectural roofing.

    Options Available:

    AP400M/AP516M: Mill Finished Cast Aluminum. "Mill  Finish" is the natural appearance of the aluminum as it comes from the  rolling mill or the extrusion mill. It is "as is" with no external  mechanical or chemical finishing.

    AP400E/AP516E: E-Coat Epoxy Primer (Medium Gloss Black) - requires a final color coat after purchase. 

    AP400C/AP516C: Painted in your choice of 9 custom colors; Matte Black, Colonial Red, Dark Bronze, Forest Green, Hartford Green, Medium Bronze, Mansard Brown, Charcoal Gray, Slate Gray (See color chart above.) Paint  requires a 3 week lead time. Please provide the color choice, name of  the roofing manufacturer and the color of the panel in the customer  notes when placing your order. (No cancellations or returns.)

    • $22.00

    Not rated yet
  • Drag and drop me to the cart

    Berger RT 200 and RT 300 snow guards are non penetrating devices which are secured to the standing seams of metal roofs utilizing stainless steel set screws to clamp them in place. They require no glues or sealants and will not restrict thermal movement or contribute to unsightly oil-canning. RT snow guards are available in two sizes to accommodate different seam widths. Also available painted.

    These  are particularly suited for double-lock and mechanically seamed metal roofing. Being traditional in design, they are ideal for restoration and  preservation work.


    RT200M (aluminum) or RT200B (bronze): For seams up to 3/16 inch (0.188 inch) and no higher than 1 inch. Suited for use with light gauge sheet metal such as 40 lb. terne, 26  gauge galvanized and 16 ounce copper.

    RT300M (aluminum) or RT300B (bronze): For seams up to  9/32 inch (0.297 inch) and no higher than 1 inch. Suited for heavier gauge metals such as 20 ounce copper, 24 gauge prefinished metal, and products of similar thickness.


    Options Available:

    RT200B/RT300B: Cast Bronze

    RT200M/RT300M: Mill Finished Cast Aluminum - "Mill Finish" is the natural appearance of the  aluminum as it comes from the rolling mill or the extrusion mill. It is  "as is" with no external mechanical or chemical finishing.

    RT200E/RT300E:  E-Coat Epoxy Primer (Medium Gloss Black) - requires a final color coat after purchase.

    RT200C/RT300C: Painted in a custom color (no cancellations or returns). Please provide the color choice, name of  the manufacturer and the color of the panel in the customer notes when  placing order.

     

    Custom Color Choices: Matte Black, Colonial Red, Dark Bronze, Forrest Green, Hartford Green, Medium Bronze, Mansard Brown, Charcoal Gray, Slate Gray (See color chart below.)

    • $13.95

    Score: 5.00 (votes: 1)
    1
  • Drag and drop me to the cart

    Berger SG1 Cast Aluminum Snow Guards for Standing Seam Roofs are available in Mill Finish (SG-1MF), or with an Epoxy Primer (SG-1EBK). They are also available in polished bronze. These non-penetrating devices are for traditional double lock standing seam roofs 1.0 inch deep x .250 inch wide. They fit both 1 inch and 1-1/2 inch high seams. The symmetrical design rotates 180 degrees to match seam lock orientation.

    The set screws are stainless steel so these snow guards can be used with any type of metal roof.

    Options Available:

    SG-1MF: Mill  Finished Aluminum - "Mill Finish" is the natural appearance of the  aluminum as it comes from the rolling mill or the extrusion mill. It is "as is" with no external mechanical or chemical finishing.
    SG-1EBK: E-Coat Epoxy Primer (Medium Gloss Black) - requires a final color coat after purchase.

    SG-1PBZ: Polished Bronze - Polished Bronze is a non-stock, special order (no cancels or returns). Requires an extended lead time.

    • $16.00

    Not rated yet
  • Drag and drop me to the cart

    Berger SL1 Cast Aluminum Snow Guard for Standing Seam Roofs are available in Mill Finish (SL1MF), or with an Epoxy Primer (SL-1EBK). These non-penetrating Cast Aluminum devices are for single lock T seam roofs 1.0 inch deep x .575 inches wide. The symmetrical design rotates 180 degrees to match seam lock orientation.

    Options Available:

    SL1MF: Mill  Finished Aluminum - "Mill Finish" is the natural appearance of the aluminum as it comes from the rolling mill or the extrusion mill. It is "as is" with no external mechanical or chemical finishing.
    SL-1EBK: E-Coat Epoxy Primer (Medium Gloss Black) - requires a final color coat after purchase.

    • $16.50

    Not rated yet
  • Drag and drop me to the cart

    Berger E-Rail Aluminum Snow Rail BRACKET ONLY, for Standing Seam Roofs is available in Mill Finish (ECSTSF) or with a black Epoxy Primer (ECSTSFE). This is a 1 or 2 rail moderate snow load system that is strong and light offering between the seams protection on metal roofs. It helps to control the possibility of dangerous ice slides, requiring no penetration of the roof. This system is easy to install. It has a receptor slot for a custom ornamental attachment.

    The rail is sold separately.   

    Designed to fit a seam of up to 0.516 inches thick and at least 1.5 inches high. The set screws are stainless steel.

    Options Available:

    ECSTSF: Mill  Finished Cast Aluminum - "Mill Finish" is the natural appearance of the aluminum as it comes from the rolling mill or the extrusion mill. It is "as is" with no external mechanical or chemical finishing. (1 or 2 Rails)

    ECSTSFE: E-Coat Epoxy Primer (Medium Gloss Black) - requires a final color coat after purchase. (1 or 2 Rails)

    TBSS20 Tubing is available in 16 gauge stainless steel, 20 feet long by 1 inch square, sold in full lengths only, currently at $149.00 each. Tube end caps are available in black plastic at $0.25 each.  We also have the stainless steel self tapping screws #8 X 1/2 inch, sold  by the bag (25 count). Our manufacturer charges a flat fee of $350.00 for shipping east of the Mississippi. Call for pricing.

    See also Berger F-Rail Aluminum Snow Rail

    See also Berger S-Rail Aluminum Snow Rail

    • $30.00

    Not rated yet
  • Drag and drop me to the cart

    Berger S-Rail aluminum snow rail BRACKET ONLY, for standing seam roofs are available in Mill Finish (SCSTSF) or with a black Epoxy Primer (SCSTSFE). This is a 1-rail, low-profile, snow retention system for standard snow loads. It functions below the standing seams on metal roofs, helping to control the possibility of dangerous ice slides. It requires no penetration of the roof and is easy to install. This is an economical snow rail that's easy to retrofit to existing roofs.

    The rail is sold separately.

    Designed to fit a seam of up to 0.516 inches thick and at least 1.5 inches high. The set screws are stainless steel.

    Options Available:

    SCSTSF: Mill  Finished Cast Aluminum - "Mill Finish" is the natural appearance of the  aluminum as it comes from the rolling mill or the extrusion mill. It is "as is" with no external mechanical or chemical finishing.

    SCSTSFE: E-Coat Epoxy Primer (Medium Gloss Black) - requires a final color coat after purchase.

    TBSS20 Tubing is available in 16 gauge stainless steel, 20 feet long by 1 inch square, sold in full lengths only, currently at $149.00 each. Tube end caps are available in black plastic at $0.25 each.  We also have the stainless steel self tapping screws #8 X 1/2 inch, sold  by the bag (25 count). Our manufacturer charges a flat fee of $350.00 for shipping east of the Mississippi. Call for pricing.

    See also Berger E-Rail and Berger F-Rail

    • $22.50

    Not rated yet
  • Drag and drop me to the cart

    Berger F-Rail aluminum snow rail BRACKETS ONLY for standing seam roofs are available in Mill Finish (FCSTSF) or with a black Epoxy Primer (FCSTSFE). This snow retention system uses 2 or 3 rails for heavier snow loads. It functions below and above the standing seams, requiring no roof penetration, and is easy to install. The rail is sold separately.

    Designed to fit a seam of up to 0.516 inches thick and at least 1.5 inches high. The set screws are stainless steel.

    Options Available:

    FCSTSF: Mill Finished Cast Aluminum - "Mill Finish" is the natural appearance  of the aluminum as it comes from the rolling mill or the extrusion mill. It is "as is" with no external mechanical or chemical finishing.

    FCSTFP: E-Coat Epoxy Primer (Medium Gloss Black) - requires a final color coat after purchase.

    TBSS20 Tubing is available in 16 gauge stainless steel, 20 feet long by 1 inch square, sold in full lengths only, currently at $149.00 each. Tube end caps are available in black plastic at $0.25 each.  We also have the stainless steel self tapping screws #8 X 1/2 inch, sold  by the bag (25 count). Our manufacturer charges a flat fee of $350.00 for shipping east of the Mississippi. Call for pricing.

     
    • $38.00

    Not rated yet
  • Drag and drop me to the cart

    Cast aluminum (SS2A) or cast bronze (SS2B), heavy duty snow guard for standing seam roofs. Groove is 1/4 inch or 3/8 inch wide (select the option) and approximately 3/4 inch deep. Six  stainless steel set screws (grade 18-8 stainless) for 1/8 inch Allen wrench.

    The aluminum snow guards are silver/gray, NOT IN ANY WAY bronze colored as the image may suggest. They are the color of mill finish aluminum.

    5 3/8 inches wide, 3 1/4 inches high off roof, 7.4 ounces (aluminum), 25.2 ounces (bronze).

    The bronze are made of solid bronze (836 stock - 85 percent copper, 5 percent tin, 5 percent zinc and 5 percent lead).


    • $10.75

    Score: 5.00 (votes: 1)
    1
  • Drag and drop me to the cart

    Heavy duty bronze snow guard for standing seam metal roofs. 7/8 inch deep groove 1/4 inch wide. 10.3 ounces each. 5 1/2 inch wide overall. Stands 4 inches high off roof.

    Minimum of 10 pieces per order!

    You may need the Double Welt Iron to hold the seam in place as you crimp the snow guard together (a sledge hammer head can work too). Made of solid bronze.
    • $15.75

    Not rated yet
  • Drag and drop me to the cart

    Cast aluminum, heavy duty snow guard for SnapLok standing seam roofs. Groove top is 5/16 inch wide tapering to 7/16 inch wide and approximately 1 3/8 inches deep, with six stainless steel set screws.

    Cast aluminum, heavy duty snow guard specially designed for Snap Lock standing  seam roofs! Groove top is 5/16 inch wide tapering to 7/16 inch wide  and approximately 1 3/8 inches deep, with six stainless steel set  screws. Overall the snow guard is 5 3/8 inches wide, 3 1/2 inches high,  10 ounces. This snow guard can be used on any type of metal roofing because the stainless steel set screws are compatible with any metal  type.

    SnapLokTM is a high-performance architectural metal roofing system designed for improved resistance to wind uplift and water infiltration. It features 1¾-inch interlocking seams with concealed clips and factory applied sealant, which allows unlimited thermal movement and maintains structural integrity.

    Minimum of 10 pieces per order!

    • $12.50

    Score: 5.00 (votes: 1)
    1
  • Drag and drop me to the cart

    Classic SS Eagle 2A cast aluminum, or 2B cast bronze heavy duty snow guard for standing seam roofs. Has a 1/4 inch wide groove, approximately 7/8 inches deep, and fits a one inch high seam, with six stainless steel set screws. The snowguard is 4 1/2 inches wide and stands 4 1/8 inches high.

    These snow guards can be used on any type of standing seam metal roof because the set screws are stainless steel and are therefore compatible with any type of metal.


    • $10.75

    Not rated yet
  • Drag and drop me to the cart

    Sieger Two-Pipe Standing Seam Snow Rail Bracket (pipes not included). This  is an affordable snow rail system built to last a lifetime! This system uses two copper water pipes or solid bars of 1/2 inch diameter, which we DO NOT provide. You can buy heavy-duty "Type K"  copper pipe through your plumbing supply outlets in 20 foot lengths, or use solid 1/2 inch copper or brass rods. Copper pipes can be soldered together with couplings. Use stainless steel pipe with the aluminum brackets.


    Options: 
    Bronze with 1/4 inch slot (SS2BCR) 
    Aluminum with 1/4 Inch Slot (SS2ACR)
    Aluminum with 3/8 Inch Slot (SS2ACR)  
    Aluminum, with Tapered Slot (SS2ASLCR) 

    SS2BCR (Bronze): Heavy duty bronze 2-pipe snow rail bracket for standing seam metal roofs. Fits one inch high by 1/4 inch wide standing seam. Six stainless steel set screws for 1/8 inch Allen wrench are compatible with any metal roofing type. 25.2 ounces each. 5 3/8 inches wide overall. Stands 3 1/4 inches high off roof. Copper pipe not included. 
     

    SS2ACR (Aluminum): This is a heavy  duty cast aluminum snow rail bracket for standing seam metal roofs. 7/8 inch deep groove 1/4 inches wide or 3/8 inches wide. Six stainless steel set screws for 1/8 inch Allen wrench are compatible with any metal roofing type. 8.5 ounces each. 5 3/8 inches wide overall. Stands 3 1/4 inches high off roof. Stainless steel pipe not included. 

    SS2ASLCR (Aluminum, with Tapered Slot): Groove is 1 3/8 inch deep and tapered 5/16 inch to 7/16 inch wide. This is a heavy  duty aluminum 2-pipe snow rail bracket for standing seam metal roofs. Six stainless steel set screws for 1/8 inch Allen wrench are compatible with any metal roofing type. 10.7 ounces each, 5 3/8 inches wide overall, standing 4 1/4 inches high off the roof.

    The aluminum brackets clamp two stainless steel pipes or solid bars of 1/2 inch diameter, which we DO NOT provide. You can buy heavy-duty stainless steel pipe through your plumbing supply outlets in 20 foot lengths, or use solid 1/2 inch stainless steel rods. Bracket is made of solid aluminum.


    • $14.95

    Not rated yet