Sieger 2-Pipe Standing Seam Brackets
Sieger Two-Pipe Standing Seam Snow Rail Bracket.
Brackets are 5 3/8-inches wide overall and stand 3 1/4-inches high off the roof.
Groove is 1/4-inch wide, 3/8-inch wide, or tapered and approximately 7/8-inch deep (tapered is 1 5/8-inch deep).
Six stainless steel set screws are included with every bracket and are compatible with any standing seam metal roofing type. Requires an 1/8-inch Allen wrench for installation.
These brackets are part of an affordable snow rail system built to last a lifetime! This system uses two copper water pipes or solid bars of 1/2-inch diameter, which we DO NOT provide. For bronze brackets, ask for "Type K" copper pipe at your local plumbing supply store, or use solid 1/2-inch copper or brass rods. Copper pipes can be soldered together with couplings.
For aluminum brackets, use stainless steel pipe.
For Snap Lock standing seam metal roofing, look for the "SL" in the product code. These slots are tapered to accommodate Snap Lock standing seams.
SS2ACR (Aluminum): This is a heavy duty cast aluminum snow rail bracket for standing seam metal roofs. 7/8-inch deep groove 1/4-inches wide or 3/8-inches wide (select below). Stainless steel pipe not included.
SS2ASLCR (Aluminum, with Tapered Slot): Groove is 1 3/8-inch deep and tapered 5/16-inch to 7/16-inch wide. This is a heavy duty aluminum 2-pipe snow rail bracket for standing seam metal roofs.
For shipping options, call or email us: