Snow Rails

We sell a variety of snow fence and snow rails for all types of roofs, either for new construction or on existing roofs (retrofit). We have the largest selection of snowguards and rails on the internet!

Items: 113 of 13, per page
Drop items here to shop
Product has been added to your cart
  • Drag and drop me to the cart

    Bronze, Aluminum, or Galvanized Iron (select below). This is the heavy-duty pipe bracket only. This guard uses three 1/2 inch diameter pipes or solid bars (not included).

    5½ inches high, 3 inches wide at base, 14 inches long with strap, 3/16 inch x 1 inch strap.

    An  affordable snow rail system built to last a lifetime! We sell the  heavy-duty copper/bronze pipe *bracket only*. The bronze bracket system uses three copper water pipes or solid bars of 1/2 inch diameter, which  we DO NOT provide. You can buy heavy-duty "Type K" copper pipe through  your plumbing supply outlets in 20 foot lengths, or use solid 1/2 inch  copper or brass rods. Space brackets no more than three feet horizontally. Copper pipes can be soldered together with couplings. 

    Worry no more  about ice and snow sliding off your roof and injuring a passerby, ruining precious shrubbery or damaging rain gutters. Recognized by contractors and roofers as the strongest, safest protection against snow and ice damage, sturdy Sieger Snow Guards have prevented ice and snow slides on America's homes since 1906.

    You may need an adhesive/sealant if attaching to a metal roof.

    Look at installation instructions online.

    • $15.99

    Not rated yet
  • Drag and drop me to the cart

    Sieger Two-Pipe Standing Seam Snow Rail Bracket (pipes not included). This  is an affordable snow rail system built to last a lifetime! This system uses two copper water pipes or solid bars of 1/2 inch diameter, which we DO NOT provide. You can buy heavy-duty "Type K"  copper pipe through your plumbing supply outlets in 20 foot lengths, or use solid 1/2 inch copper or brass rods. Copper pipes can be soldered together with couplings. Use stainless steel pipe with the aluminum brackets.


    Options: 
    SS2BCR (Bronze, with 1/4 inch slot); 
    SS2ACR (Aluminum, with 1/4 inch or 3/8 inch slot); 
    SS2ASLCR (Aluminum, with Tapered Slot)


    SS2BCR (Bronze): Heavy duty bronze 2-pipe snow rail bracket for standing seam metal roofs. Fits one inch high by 1/4 inch wide standing seam. Six stainless steel set screws for 1/8 inch Allen wrench are compatible with any metal roofing type. 25.2 ounces each. 5 3/8 inches wide overall. Stands 3 1/4 inches high off roof. Copper pipe not included.
     

    SS2ACR (Aluminum): This is a heavy  duty cast aluminum snow rail bracket for standing seam metal roofs. 7/8 inch deep groove 1/4 inches wide or 3/8 inches wide. Six stainless steel set screws for 1/8 inch Allen wrench are compatible with any metal roofing type. 8.5 ounces each. 5 3/8 inches wide overall. Stands 3 1/4 inches high off roof. Stainless steel pipe not included.

    SS2ASLCR (Aluminum, with Tapered Slot): Groove is 1 3/8 inch deep and tapered 5/16 inch to 3/8 inch wide. This is a heavy  duty aluminum 2-pipe snow rail bracket for standing seam metal roofs. Six stainless steel set screws for 1/8 inch Allen wrench are compatible with any metal roofing type. 10.7 ounces each, 5 3/8 inches wide overall, standing 4 1/4 inches high off the roof.

    The aluminum brackets clamp two stainless steel pipes or solid bars of 1/2 inch diameter, which we DO NOT provide. You can buy heavy-duty stainless steel pipe through your plumbing supply outlets in 20 foot lengths, or use solid 1/2 inch stainless steel rods. Bracket is made of solid aluminum.


    • $13.25

    Not rated yet
  • Drag and drop me to the cart

    Super heavy duty copper/brass snow rail system. 

    Please call us at 814-786-9085 or Email in order to determine availability and pricing. You cannot order these items from this page. This  item is a special order item that requires a 4-8 week lead time. Since this product is made to order it is non-returnable and non-refundable.

    The  Model #500 Snow Fence Bracket is cast from solid bronze for lifetime durability. The castings have been carefully engineered to assure  maximum strength at the points of greatest stress when under load.  Double back brace brackets are standard, and give redundant protection  against casting failure when under load. Holes for rails are 1.125  inches to accommodate 1.05 inch (od) brass pipe. The brackets are  available in three angles: 90, 67.5, and 45 degrees. The base plate is  1/8 inch 220 bronze. The Model #500 is typically installed along the  perimeter of slate roofs with rafters up to 25 feet in areas with  moderate to high snow falls. The Model #500 is a custom order and the  base plate can be fabricated to any specified size. 3/4 inch Red Brass  Pipe, Couplings and End Caps sold separately. Please call us at  814-786-9085 or Email  for more information.

    Download Mullane 500 3D

    READ MORE ABOUT SNOW RAILS

     

    Call for price!
    1-814-786-9085

    Not rated yet
  • Drag and drop me to the cart

    Super heavy duty copper/brass and iron snow rail systems for roofs, both two and three pipes. Prices depend on many variables so you must call us at 814-786-9085 or Email to determine availability and pricing. You cannot order these items from this page. 

    This item is a special order item that requires a 4-8 week lead time. Since this product is made to order it is non returnable and non refundable.

    LOOK AT OUR SNOW RAIL BROCHURE

    Call for price!
    1-814-786-9085

    Not rated yet
  • Drag and drop me to the cart

    Berger E-Rail Aluminum Snow Rail BRACKET ONLY, for Standing Seam Roofs is available in Mill Finish (ECSTSF) or with a black Epoxy Primer (ECSTSFE). This is a 1 or 2 rail moderate snow load system that is strong and light offering between the seams protection on metal roofs. It helps to control the possibility of dangerous ice slides, requiring no penetration of the roof. This system is easy to install. It has a receptor slot for a custom ornamental attachment.

    The rail is sold separately. Most people choose to buy the rail locally, so they do not have to pay the $125.00 freight charge.  

    Designed to fit a seam of up to 0.516 inches thick and at least 1.5 inches high. The set screws are stainless steel.

    Options Available:

    ECSTSF: Mill  Finished Cast Aluminum - "Mill Finish" is the natural appearance of the aluminum as it comes from the rolling mill or the extrusion mill. It is "as is" with no external mechanical or chemical finishing. (1 or 2 Rails)

    ECSTSFE: E-Coat Epoxy Primer (Medium Gloss Black) - requires a final color coat after purchase. (1 or 2 Rails)

    The  rail is sold separately. TBSS20 Tubing is available in 16 gauge stainless steel, 20 feet long by 1 inch square, sold in full lengths only, priced by the foot. Tube end caps are available in black plastic.  We also have the stainless steel self tapping screws #8 X 1/2 inch, sold  by the bag (25 count). Call for pricing.

    See also Berger F-Rail Aluminum Snow Rail

    See also Berger S-Rail Aluminum Snow Rail

    • $30.00

    Not rated yet
  • Drag and drop me to the cart

    Berger F-Rail aluminum snow rail BRACKETS ONLY for standing seam roofs are available in Mill Finish (FCSTSF) or with a black Epoxy Primer (FCSTSFE). This snow retention system uses 2 or 3 rails for heavier snow loads. It functions below and above the standing seams, requiring no roof penetration, and is easy to install. The rail is sold separately. Most people choose to buy the rail locally, so they do not have to pay the freight charge.

    Designed to fit a seam of up to 0.516 inches thick and at least 1.5 inches high. The set screws are stainless steel.

    Options Available:

    FCSTSF: Mill Finished Cast Aluminum - "Mill Finish" is the natural appearance  of the aluminum as it comes from the rolling mill or the extrusion mill. It is "as is" with no external mechanical or chemical finishing.

    FCSTFP: E-Coat Epoxy Primer (Medium Gloss Black) - requires a final color coat after purchase.

    The rail is sold separately. TBSS20 Tubing is available in 16 gauge stainless steel, 20 feet long by 1 inch square, sold in full lengths only, priced by the foot. Tube end caps are available in black plastic. We also have the stainless steel self tapping screws #8 X 1/2 inch, sold  by the bag (25 count). Call for pricing (814-786-9085).

     
    • $38.00

    Not rated yet
  • Drag and drop me to the cart

    Berger S-Rail aluminum snow rail BRACKET ONLY, for standing seam roofs are available in Mill Finish (SCSTSF) or with a black Epoxy Primer (SCSTSFE). This is a 1-rail, low-profile, snow retention system for standard snow loads. It functions below the standing seams on metal roofs, helping to control the possibility of dangerous ice slides. It requires no penetration of the roof and is easy to install. This is an economical snow rail that's easy to retrofit to existing roofs.

    The rail is sold separately. Most people choose to buy the rail locally, so they do not have to pay the $125.00 freight charge.

    Designed to fit a seam of up to 0.516 inches thick and at least 1.5 inches high. The set screws are stainless steel.

    Options Available:

    SCSTSF: Mill  Finished Cast Aluminum - "Mill Finish" is the natural appearance of the  aluminum as it comes from the rolling mill or the extrusion mill. It is "as is" with no external mechanical or chemical finishing.

    SCSTSFE: E-Coat Epoxy Primer (Medium Gloss Black) - requires a final color coat after purchase.

    The rail is sold separately. TBSS20 Tubing is available in 16 gauge stainless steel, 20 feet long by 1 inch square, sold in full lengths only, priced by the foot. Tube end caps are available in black plastic.  We also have the stainless steel self tapping screws #8 X 1/2 inch, sold  by the bag (25 count). Call for pricing.

    See also Berger E-Rail and Berger F-Rail

    • $22.00

    Not rated yet
  • Drag and drop me to the cart

    Select for 2 or 3 pipes and shorter or longer Spanish Tiles below. The long and short brackets match the Ludowici short and long Spanish tiles: Short = 12 3/4 inches to 13 inches; Long = 18 inches.

    This item is a  special order item that requires a 4-8 week lead time. Since this  product is made to order it is non returnable and non refundable.

    • $186.00

    Not rated yet
  • Drag and drop me to the cart

    R532 3-Pipe Bronze Bracket for Spanish Tile. The brackets match the Ludowici short Spanish tiles: Short = 12 3/4 inches to 13 inches.

    This item is a  special order item that requires a 4-8 week lead time. Since this  product is made to order it is non-returnable and non-refundable. You  may need to send a sample piece of tile so we can make sure the match is  exact.

    • $354.10

    Not rated yet
  • Drag and drop me to the cart

    Fitrite #631 3-pipe Aluminum Alloy Snow Fence Bracket for French Tile

    This item is a special order item that requires a 4-8 week lead time. Since this  product is made to order it is non-returnable and non-refundable. You may need to send a sample piece of tile so we can make sure the match is  exact.

    • $198.50

    Not rated yet
  • Drag and drop me to the cart

    Fitrite #632 3-pipe bronze snow fence bracket for French Tile

    This item is a  special order item that requires a 4-8 week lead time. Since this  product is made to order it is non-returnable and non-refundable. You  may need to send a sample piece of tile so we can make sure the match is  exact.

    • $351.00

    Not rated yet
  • Drag and drop me to the cart

    Fitrite #831 3-pipe aluminum alloy snow fence bracket for Designer Tile.

    Also available in bronze.

    This item is a  special order item that requires a 4-6 week lead time. Since this  product is made to order it is non-returnable and non-refundable. You  may need to send a sample piece of tile so we can make sure the match is  exact.

    • $220.30

    Not rated yet
  • Drag and drop me to the cart

    Fitrite #832 3-pipe bronze snow fence bracket for Designer Tile. There is also a smaller version of this bracket. Please call us with your measurements. 814-786-9085 M-F, 9-5, Eastern.

    Also available in aluminum.

    This item is a  special order item that requires a 4-8 week lead time. Since this  product is made to order it is non-returnable and non-refundable.  You  may need to send a sample piece of tile so we can make sure the match is  exact.

    • $510.10

    Not rated yet