0 items in cart
Designed to be installed on existing slate roofs. All BRONZE GUARD® products are cast in pure tin bronze, using only virgin metals to assure the highest quality alloy. Slide this snowguard in between two existing slates until the top of the snow guard hooks over the top of the underlying slate. See instructional video below.
A traditional spike style snow guard, from a design first patented in 1899. The Model #100 is historically accurate for period restorations, but is just as appropriate for new construction or retrofit application on existing slate roofs. Because of its low profile, this model is more appropriate for residential usage. The Model #100 is for applications on slate, shake, and shingle roofs, and is designed to fit between adjacent pieces of roof material, so that only the casting is visible above the roof surface.[The #100 snowguard has a smaller face than the Mullane #200 Retrofit Snowguard, and is less expensive.]Snow guards should be installed where the potential for the sudden sliding of ice and snow can be hazardous to people or property below. Falling snow is a life safety issue, and careful consideration of liability issues should be part of a carefully designed roof system in all areas prone to winter snow and ice.All BRONZE GUARD® products are cast in pure tin bronze, using only virgin metals to assure the highest quality alloy. The castings are produced locally by old-world craftsmen using state of the art equipment to assure that each casting is of consistent quality. The final assembly is done by hand, using only solid copper rivets, so that each finished product is of uniform quality.
© 2000 - 2018 Snow Guard Warehouse. All rights reserved.
Powered by X-Cart