Flat Metal Roofs

We sell a variety of snow guards and roof snow retention devices specifically made for flat metal roofs, either for new construction or on existing roofs (retrofit). We have the largest selection of snowguards and rails on the internet!


Items: 115 of 30, per page
Drop items here to shop
Product has been added to your cart
  • Drag and drop me to the cart

    Bronze, Aluminum, or Galvanized Iron (select below). This is the heavy-duty pipe bracket only. This guard uses three 1/2 inch diameter pipes or solid bars (not included).

    5½ inches high, 3 inches wide at base, 14 inches long with strap, 3/16 inch x 1 inch strap.

    An  affordable snow rail system built to last a lifetime! We sell the  heavy-duty copper/bronze pipe *bracket only*. The bronze bracket system uses three copper water pipes or solid bars of 1/2 inch diameter, which  we DO NOT provide. You can buy heavy-duty "Type K" copper pipe through  your plumbing supply outlets in 20 foot lengths, or use solid 1/2 inch  copper or brass rods. Space brackets no more than three feet horizontally. Copper pipes can be soldered together with couplings. 

    Worry no more  about ice and snow sliding off your roof and injuring a passerby, ruining precious shrubbery or damaging rain gutters. Recognized by contractors and roofers as the strongest, safest protection against snow and ice damage, sturdy Sieger Snow Guards have prevented ice and snow slides on America's homes since 1906.

    You may need an adhesive/sealant if attaching to a metal roof.

    Look at installation instructions online.

    • $15.99

    Not rated yet
  • Drag and drop me to the cart

    Aluminum or bronze, select below. Jalco Snow Guards have been designed to prevent snow slides. Two mounting holes. 2 inch long base by 2 1/4 inch wide, 5 5/8 inch total width, 2 1/2 inches high. Comes with two 1 5/8 inch fasteners per snow guard.

    Jalco aluminum snow guards can be painted in any color upon request at an additional charge.


    • $5.95

    Not rated yet
  • Drag and drop me to the cart

    SNOW BOSS #630 are solid cast aluminum (mill finish aluminum) snow guards and are best used for curtain wall systems, window wells, or cornice shelves.

    Typical installation is by means of high strength adhesives  (SB-190)  that develop superior peel and shear bonding strength on modern metal roofs coated with plastic resin paints such as Kynar®. Adhesive  failure does not constitute Berger product defect and is not the responsibility of Berger. May also be mechanically attached.

    • $8.99

    Not rated yet
  • Drag and drop me to the cart

    A decorative, spoked, half-round, solid cast, mill-finish aluminum snow guard attached with high-strength adhesive, for the mid-panel application on all standing, batten and flat seam, non-copper metal roofs.

    You can also mechanically attach these snow guards with our stainless steel screws, but you have to drill pilot holes in them first (and still use the adhesive).
    • $14.40

    Not rated yet
  • Drag and drop me to the cart

    Copper or aluminum snowguards that provide low profile snow protection for metal panel and metal shingle roofs. Available in Kynar-coated aluminum or copper. Must be mechanically fastened. Copper can be soldered.

    Clip Style Snow Guard

    • Length: 6 Inches
    • Width: 2 3/8 Inches

    Designed to be installed on new and existing: Metal Panels, Metal Shingles, and Single Ply Membranes. (Screws may be needed when installing on an existing roof.)

    Available in:

    • 16 Ounce Copper
    • Kynar-Coated .032 Aluminum in Liberty Gray or Dark Bronze
    • Powder Coated Aluminum for $2.00 extra per snowguard. See color chart below. Call us at (814) 786-9085 to order a specific color. Lead time for powder coating and fabrication is approximately 2 weeks.  
    • $4.75

    Not rated yet
  • Drag and drop me to the cart
    Berger #20 Snow Guard for flat roofs is available in bronze or galvanized malleable iron (select below). Use stainless steel screws and a high strength adhesive. The face of the snow guard is five inches wide, the base (the part that sits on the roof) is 3 inches long and the snowguard sits 2  1/2 inches high off the roof.
    • $8.30

    Not rated yet
  • Drag and drop me to the cart

    Typically installed on metal panel & metal shingle roofs, and existing asphalt shingle roofs. Available in copper and powder coated steel. This is a custom item and is not stocked.

    Clip Style Snow Guard

    • Length: 5 1/2 Inches
    • Width: 1 4/5 Inches
    • Weight: 6.6 Ounces

    Designed for new installations on:

    • Standing seam metal panel
    • Through fastened metal panel
    • Metal shingle
    • Existing asphalt shingle roofs


    Available in: (Not Stocked. Fabrication is approximately 2 weeks.)

    • Copper (all snow guard components are 16 ounce copper)
    • Powder Coated EG Steel, dark bronze and liberty gray are standard colors, other colors by request (color chart can  be seen below.) You will need to  call (814) 786-9085 to order a specific color. Lead time for powder  coating and fabrication is approximately 2 weeks.


    We have fasteners for installing snowguards.

    • $9.90

    Not rated yet
  • Drag and drop me to the cart

    Snow guard designed for installations on new asphalt and metal shingle roofs. Available in Powder Coated EG Steel and Copper. Typically, snow guards ST11RG10, and RG16 are kept in stock and will ship within 48 hours from processing. If it's not in stock the average lead time is 2 weeks.

    Clip Style Snow Guard

    • Length: 10 1/8 Inches
    • Width: 1 3/4 Inches
    • Height: 2 3/8 Inches
    • Weight: 8.2 Ounces

    Designed for new installations on:

    • Metal Shingle
    • Cedar Shake and Shingle
    • Synthetic Slate and Shake
    • Asphalt Shingle

    Available in:

    • Copper (All snow guard components are 16 ounce copper.) Also in stock.
    • Powder  Coated EG Steel - We keep Liberty  Gray or Dark Bronze in stock. All  other colors will have a longer lead time. Color chart can be seen below. You will need to call (814)  786-9085 to order a specific color. Lead time for powder coating and  fabrication is approximately 2 weeks.

    We have fasteners for installing snowguards.

    • $6.25

    Not rated yet
  • Drag and drop me to the cart

    An inexpensive metal snow guard for metal roofs and asphalt shingle roofs. RGW (Wide) Snow Guards are available in powder-coated aluminum and copper.

    Clip Style Snow Guard

    • Length:  3.0 Inches
    • Width:  2.5 Inches
    • Height:  2.75 Inches
    • Weight: 3.84 Ounces

    Designed for new or existing installations on:

    • Through Fastened Metal Panel
    • Metal Shingle
    • Standing Seam Metal Panel
    • Single Ply Membrane

    Available in:

    • Powder  Coated Aluminum. Dark Bronze and  Liberty Gray are stocked. Color chart can be seen below. You will need to call (814) 786-9085 to order a  specific color. Lead time for  powder coating and fabrication is approximately 2 weeks.
    • Mill Finished Aluminum also available.

    We have fasteners for installing snowguards.

    • $4.50

    Not rated yet
  • Drag and drop me to the cart

    An inexpensive metal snow guard for metal roofs. RGN (Narrow) Snow Guards are available in Powder Coated Aluminum and Mill Finish Aluminum. 

    Clip Style Snow Guard

    • Length: 3 Inches
    • Width: 1 3/4 Inches
    • Weight: 2.7 Ounces
    • Height: 2 3/4 Inches

    Designed for new installations on:

    • Standing Seam Metal Panel
    • Through Fastened Metal Panel
    • Metal Shingle

    Available in:

    • Powder  Coated Aluminum - Color chart can be seen below. You will need to call (814) 786-9085 to order a specific color. Lead time for powder coating and fabrication is  approximately 2 weeks.
    • Mill Finished Aluminum (In stock.)

    We have fasteners for installing snowguards.

    • $3.95

    Not rated yet
  • Zaleski Flat Roof Snow Guards
    • 35% less
    Drag and drop me to the cart

    Made in the USA

    Options:

    Model #7C: Our model No.-7 regular copper snow guard is manufactured using .020 thickness of cold rolled copper. Since it is double thick, the result is .020 x 2 = .040. Weight: 3.1 Ounces

    Model #7LC: Lead Coated Snow Guard is accomplished when a lead coating is applied to the Zaleski Model # 7 Copper Snow Guard. Weight: 3.1 Ounces

    Model #9: Stainless Steel Snow Guard is manufactured using a double layer of .020 inch stainless steel. Weight: 2.7 Ounces

    Model #9TC: Terne Coated Snow Guard is manufactured using terne-coated stainless steel. Weight: 3.7 Ounces

    Model #14: Freedom Gray Snow Guard is manufactured using lead-free Freedom Gray copper coated with 50% tin and 50% zinc. Weight: 3.5 Ounces

    Solder or mechanically fasten to the roof. Add sealant when mechanically fastening.

    Designed for installation on copper and other types of roofs.

    Length: 5 Inches

    Width: 1.5 Inches

    Height: 2.5 Inches

    Zaleski Snowguard Spacing Calculation


    • $7.00

    Not rated yet
  • Drag and drop me to the cart

    Our Model #11A aluminum snow guard is manufactured using #319 aluminum for casting. Tensile strength 17,000 pounds per square inch. Three pre-drilled holes for fastening with screws. We offer a baked on painted finish to match your color sample.

    Designed for installation on metal roofs other than copper. May use sealant and/or screws for attachment to the roof. 

    You  may also have snow guards painted (baked-on finish) matched to your color sample, or choose from the color chart shown here.

    Minimum quantity for painting is 100.

    Weight: 3.8 Ounces

    Height: 2.325 Inches

    Width: 1.5 Inches

    Length: 5 Inches

    Zaleski Snowguard Spacing Calculation

    • $5.25

    Not rated yet
  • Drag and drop me to the cart

    Our Model #15 Clear Plastic snow guard is manufactured using a polycarbonate stronger than bullet-proof glass. Treated with an ultraviolet stabilizer. Will resist temperature changes. Three pre-drilled holes for fastening with screws. 

    Designed for installation on metal, rubber, TPO, PVC, and Glass.

    Fastened with sealant and/or screws.

    Length: 5 Inches

    Width: 1.5 Inches

    Height: 2.325 Inches

    Weight: 1.4 Ounces

    • $1.90

    Not rated yet
  • Drag and drop me to the cart

    Our Model #15 Plastic snow guard, available in many colors, is manufactured using a polycarbonate stronger than bullet-proof glass and is treated with an ultraviolet stabilizer. Will resist temperature changes. Three pre-drilled holes for fastening with screws. 

    The image shown is #41 Dark Red. You may view all of the colors available by clicking on the Zaleski color chart below.

    Designed for installation on metal, rubber, TPO, PVC, and glass roofs.

    May be fastened to roof using sealant and/or screws.

    Length: 5 Inches

    Width: 1.5 Inches

    Height: 2.325 Inches

    Weight: 1.4 Ounces

    Zaleski Snowguard Spacing Calculation

    • $2.25

    Not rated yet
  • Drag and drop me to the cart

    Quality snow guard protection at an affordable price! For both commercial and residential use. Use on: Metal, Rubber, TPO, PVC, & Glass Roofs. They attach using adhesive sealant only, screws, or both. One standard tube will adhere about 20 snowguards.

    Weight: 2 Ounces

    Height: 2.375 Inches  

    Width: 1.5 Inches  

    Length: 5 Inches

    Strong: Gusseted and thick wall design for maximum strength. Square channel grooves for adhesive increases shear strength. 

    Lasting: UV Inhibitor prevents discoloration and degradation from damaging sunlight. Resists temperature extremes. Virtually unbreakable from snow and ice.

    Color options: Clear, Forest Green, Patina Green, Colonial Red, McDonalds Red, Medium Bronze, Charcoal Gray, and Matte Black.  Made in the USA!

    Sno-Safe Snow Guards prevent damaging snow avalanches on roofs. They work together to function as cleats holding the snow evenly over a roof surface. Sno-Safe Snow Guards distribute snow weight evenly when positioned throughout a roof in staggered rows. As the snow melts, the snow guards help to break up the snow into small pieces which shed off the roof. Protect people, gutters, driveways, HVAC units, and decks with Sno-Safe Snow Guards. Sno-Safe Snow Guards are the perfect snow retention solution for both commercial and residential roofs. A low profile design provides minimal distraction. Can be installed on large commercial roofs, ledges, skylights, and canopies. Sno-Safe is an equally good choice for residential snow guard protection of homes, garages, and barns.

    • $1.38

    Not rated yet
Items: 115 of 30, per page