17 1/2 inches overall length, 4 inch wide face, 12 1/2 inch reach, protrudes away from the roof about 3 inches.
NOTE: Returned Berger snowguards require a 25% restocking fee, so make sure you're getting the right ones!
Copper Professional Retrofit Style Snow Guards for slate or asphalt shingle roofs. This is one of the best deals you can get in a heavy-duty copper snow guard that can be installed on existing slate roofs or new roofs! The heavy-duty Pro 100 snow guard is available in copper and stainless steel for corrugated, flat, slate and asphalt shingled roofs.
The superior design of the Pro 100 includes a 1-inch gusset that reinforces the shoe, which makes this snow guard 5X stronger than traditional residential snow guards. The Pro 100 has been tested to withstand a 300-pound point load at any location when applied to the gusset side of the shoe. Simply insert the slotted bar under the slate or shingle, engage a nail with one of the conveniently placed slots and pull to fully secure the bar (12 1/2 inches maximum reach to nail). This style snow guard provides fast installation and is ideal for existing applications with slate roofs.
Snow guards should be installed where the potential for the sudden sliding of ice and snow can be hazardous to people or property below. Falling snow is a life safety issue, and careful consideration of liability issues should be part of a carefully designed roof system in all areas prone to winter snow and ice.
The following recommendation is for a typical application, slate size 12 inches x 18 inches, with a 7 1/2 inch exposure, and a roof pitch of 12/12 (45 degrees) and can be adjusted for differing conditions such as high snow loads, or drifting conditions. For this example, the rafter length is 18 feet.
Guards shall be installed in horizontal rows parallel to the eave. The first row shall be installed on the third course of slate, and spaced no more than 24 inches apart in the rows. Subsequent rows shall be spaced 30 inches vertically (4th slate course) and the guards offset 12 inches from the course below. Install 6 horizontal rows.
The preceding technical information is for informational purposes only and is not intended to replace the manufacturer's recommendations for a particular project. We will provide layouts upon receipt of roof plan with elevations. Manufacturer is not responsible for improper installation, or installation in insufficient quantities.GENERAL INSTALLATION GUIDELINES
WE CAN HELP FIGURE OUT YOUR LAYOUT
ONLINE SNOWGUARD LAYOUT REQUEST
DOWNLOAD OUR SNOWGUARD CATALOG
MULLANE SNOW GUARD BROCHURE
IMPORTANT NOTE ABOUT SHIPPING RATES: We often can ship snowguards free when there is sufficient quantity! In any case, for an accurate shipping cost for snowguards, please call us at 814-786-9085 (M-F, 9-5, eastern time, USA), orsend us an emailand include the item, quantity, "ship to" zip code, and type of UPS shipping method such as UPS ground.