Berger Pro 100 Retrofit
Berger Pro 100 Retrofit Snow Guards: Copper (SGCP100), Stainless Steel (SGSP100), or Galvanized steel (SGGP100). Select below.
This is one of the best deals you can get on heavy-duty snow guards! 17 1/2 inches overall length, 4 inch wide face, 12 1/2 inch reach, 8.3 ounces each.
The heavy-duty Pro 100 snow guard is available for corrugated, flat, slate, TruSlate, and asphalt shingled roofs.
The superior design of the Pro 100 includes a one inch gusset that reinforces the shoe, which makes this snow guard 5X stronger than traditional residential snow guards. The Pro 100 has been tested to withstand a 300-pound point load at any location when applied to the gusset side of the shoe. Simply insert the slotted bar under the slate or shingle, engage a nail with one of the conveniently placed slots and pull to fully secure the bar (12 1/2 inches maximum reach to nail). This style of snow guard provides fast installation and is ideal for existing applications with slate roofs.
Snow guards should be installed where the potential for the sudden sliding of ice and snow can be hazardous to people or property below. Falling snow is a safety issue, and careful consideration of liability issues should be part of a carefully designed roof system in all areas prone to winter snow and ice.
The following recommendation is for a typical application: slate size 12 inches x 18 inches, with a 7 1/2 inch exposure, and a roof pitch of 12/12 (45 degrees) and can be adjusted for differing conditions such as high snow loads, or drifting conditions. For this example, the rafter length is 18 feet.
Guards shall be installed in horizontal rows parallel to the eave. The first row shall be installed on the third course of slate, and spaced no more than 24 inches apart in the rows. Subsequent rows shall be spaced 30 inches vertically (4th slate course) and the guards offset 12 inches from the course below. Install 6 horizontal rows. The preceding technical information is for informational purposes only and is not intended to replace the manufacturer's recommendations for a particular project. We will provide layouts upon receipt of roof plan with elevations. Manufacturer is not responsible for improper installation, or installation in insufficient quantities.
IMPORTANT NOTE ABOUT SHIPPING RATES: We offer free shipping on orders of sufficient quantity! For accurate shipping costs, please call us at 814-786-9085 (M-F, 9-5, eastern time, USA), or send us an email and include the item, quantity, "ship to" zip code, and type of UPS shipping method such as UPS ground.
Metal Type(SGGP100) Galvanized, (SGSP100) Stainless, (SGCP100) Copper