Sieger 2-Pipe Standing Seam Brackets
Sieger Two-Pipe Standing Seam Snow Rail Bracket (pipes not included). This is an affordable snow rail system built to last a lifetime! This system uses two copper water pipes or solid bars of 1/2 inch diameter, which we DO NOT provide. You can buy heavy-duty "Type K" copper pipe through your plumbing supply outlets in 20 foot lengths, or use solid 1/2 inch copper or brass rods. Copper pipes can be soldered together with couplings. Use stainless steel pipe with the aluminum brackets.
Groove is 1/4 inch wide, 3/8 inch wide, or tapered (select the option) and approximately 7/8 inch deep (tapered is 1 5/8 inch deep).
Six stainless steel set screws for a 1/8 inch Allen wrench are included with every bracket and are compatible with any standing seam metal roofing type. The brackets are 5 3/8 inches wide overall and stand 3 1/4 inches high off the roof.
For Snap Lock standing seam metal roofing, look for the "SL" in the product code. These slots are tapered to accommodate Snap Lock standing seams.
Aluminum with 3/8 Inch Slot (SS2ACR)
Aluminum, with 5/16 to 7/16 inch tapered slot (SS2ASLCR)
SS2ACR (Aluminum): This is a heavy duty cast aluminum snow rail bracket for standing seam metal roofs. 7/8 inch deep groove 1/4 inches wide or 3/8 inches wide (select below). Stainless steel pipe not included.
SS2ASLCR (Aluminum, with Tapered Slot): Groove is 1 3/8 inch deep and tapered 5/16 inch to 7/16 inch wide. This is a heavy duty aluminum 2-pipe snow rail bracket for standing seam metal roofs.