Mullane 300S Standard Snowguard

The Mullane 300S standard snow guard for new installations on slate roofs (#300S-NA) or asphalt shingle roofs (#300S-AS) is a solid bronze pad style snow guard for all steep roof applications. The half round Model #300 casting is attached to a 20 ounce copper installation base flange by four brass rivets for extreme durability and snow load bearing capacity. Select type below.

18 inches long, 2.5 inches wide, protrudes up from the roof about 2 inches. Tested at 870 pounds pressure.

Minimum purchase quantity: 3 units

berger_snowguard_guide.pdf 222.4 kB
GENERAL INSTALLATION INSTRUCTIONS
Mullane_300SNA_Installation.pdf 135 kB
MULLANE 300S-NA INSTALLATION INSTRUCTIONS
Mullane_300SAS_Installation.pdf 98.3 kB
MULLANE 300S-AS INSTALLATION INSTRUCTIONS
mullane_300S_cad.pdf 394.2 kB
DATA SHEET
Mullane_300SNA_CAD.pdf 146.5 kB
CAD DRAWING
Mullane_Brochure_SGW.pdf 1.1 MB
MULLANE SNOW RETENTION PRODUCTS CATALOG

ONLINE SNOWGUARD LAYOUT REQUEST

The solid bronze casting eliminates the corrosion problem caused by condensation which is formed inside of closed, pressed copper snow guards. The installation flange can be easily fabricated to any length for any roof application, and is also available with our Retro-Hook.

The installation flange can be easily fabricated to any length for any roof application, typically 18 inches for new slate and 9 inches for shingle. For solder application on copper roofs, specify the Model #300CPSM.

Snow guards should be installed where the potential for the sudden sliding of ice and snow can be hazardous to people or property below. Falling snow is a life safety issue, and careful consideration of liability issues should be part of a carefully designed roof system in all areas prone to winter snow and ice.

All BRONZE GUARD® products are cast in pure tin bronze, using only virgin metals to assure the highest quality alloy. The castings are produced locally by old-world craftsmen using state of the art equipment to assure that each casting is of consistent quality. The final assembly is done by hand, using only solid copper rivets, so that each finished product is of uniform quality.

NOTE: Returned Mullane or Berger snowguards require a 25% restocking fee, so make sure you're getting the right ones!

IMPORTANT NOTE ABOUT SHIPPING RATES: We often can ship snowguards free when there is sufficient quantity! In any case, for an accurate shipping cost for snowguards, please call us at 814-786-9085 (M-F, 9-5, eastern time, USA), or send us an email and include the item, quantity, "ship to" zip code, and type of UPS shipping method such as UPS ground.

Manufacturer
Mullane Snow Guards
Slate or Asphalt Roof?
300S-NA for Slate, 300S-AS for Asphalt

There are no comments yet. Be the first to leave a comment