Mullane 100S-RH Retrofit
The Mullane 100S-RH Retrofit snowguard is designed to be installed on existing slate roofs. All BRONZE GUARD® products are cast in pure tin bronze, using only virgin metals to assure the highest quality alloy. Slide this snowguard in between two existing slates until the top of the snow guard hooks over the top of the underlying slate. See instructional video below.
A traditional spike style snow guard, from a design first patented in 1899. The Model #100 is historically accurate for period restorations, but is just as appropriate for new construction or retrofit application on existing slate roofs. Because of its low profile, this model is more appropriate for residential usage. The Model #100 is for applications on slate, shake, and shingle roofs, and is designed to fit between adjacent pieces of roof material, so that only the casting is visible above the roof surface.
The #100 snowguard has a smaller face than the Mullane #200 Retrofit Snowguard, and is less expensive.
Snow guards should be installed where the potential for the sudden sliding of ice and snow can be hazardous to people or property below. Falling snow is a life safety issue, and careful consideration of liability issues should be part of a carefully designed roof system in all areas prone to winter snow and ice.
IMPORTANT NOTE ABOUT SHIPPING RATES: We often can ship snowguards free when there is sufficient quantity! In any case, for an accurate shipping cost for snowguards, please call us at 814-786-9085 (M-F, 9-5, eastern time, USA), or send us an email and include the item, quantity, "ship to" zip code, and type of UPS shipping method such as UPS ground.