Previous image
Berger #95 Ornamental Snowguard
Next image
Zoom image

Berger #95 Ornamental Snowguard


Not rated yet

Berger Brothers Model #95 heavy duty ornamental snow guard in bronze, aluminum or galvanized iron (select below). A larger guard with Gothic styling designed to transfer snow and ice loads more effectively to reduce cracking of the slate.

1/8  inches x 1 inch x 12 inch bar in appropriate metal combination.  Excellent in areas that receive heavy snows! This snow guard is to be  installed during the slate roof installation (it is not a retrofit  model).


  • $14.75
Minimum purchase quantity: 3 units
Qty:  
  • Weight
    1.25 lbs
  • SKU
    129GA
 

 
NOTE: Returned Berger snowguards require a 25% restocking fee, so make sure you're getting the right ones!
 
This snow guard for slate or asphalt roofs is available in bronze, aluminum or galvanized iron. This is a larger guard with Gothic styling designed to transfer snow and ice loads more effectively to reduce cracking of the slate.

Snow guards should be installed where the potential for the sudden sliding of ice and snow can be hazardous to people or property below. Falling snow is a life safety issue, and careful consideration of liability issues should be part of a carefully designed roof system in all areas prone to winter snow and ice.

The following recommendation is for a typical application, slate size 12 inches x 18 inches, with a 7.5 inches exposure, and a roof pitch of 12/12 (45 degrees). This is a typical example, and can be used and adjusted for differing conditions such as high snow loads, or drifting conditions. For this example, the rafter length is 18 feet.

Guards shall be installed in horizontal rows parallel to the eave. The first row shall be installed on the third course of slate, and spaced no more than 24 inches apart in the rows. Subsequent rows shall be spaced 30 inches vertically (4th slate course) and the guards offset 12 inches from the course below. Install 6 horizontal rows. The preceding technical information is for informational purposes only and is not intended to replace the manufacturer's recommendations for a particular project. We will provide layouts upon receipt of roof plan with elevations. Manufacturer is not responsible for improper installation, or installation in insufficient quantities.

 

SCREWS AND ADHESIVES

ONLINE SNOWGUARD LAYOUT REQUEST


IMPORTANT NOTE ABOUT SHIPPING RATES: We often can ship snowguards free when there is sufficient quantity! In any case, for an accurate shipping cost for snowguards, please call us at 814-786-9085 (M-F, 9-5, eastern time, USA), or send us an email and include the item, quantity, "ship to" zip code, and type of UPS shipping method such as UPS ground.



  • Manufacturer
    Berger Snow Guards
  • Metal Type
    SGML95 Galvanized Iron, SGAL95 Aluminum, SGBR95 Bronze
Customer reviews
Please sign in to add review
There are no comments yet. Be the first to leave a comment
Related products
Drop items here to shop
Product has been added to your cart
  • Drag and drop me to the cart

    Not rated yet
    • $5.20
  • Drag and drop me to the cart

    Not rated yet
    • $6.00
  • Drag and drop me to the cart

    Not rated yet
    • $31.99
  • Drag and drop me to the cart

    Not rated yet
    • $31.99
  • Drag and drop me to the cart

    Not rated yet
    • $31.99
  • Drag and drop me to the cart

    Not rated yet
    • $6.30
  • Drag and drop me to the cart

    Not rated yet
    • $7.99
  • Drag and drop me to the cart

    Not rated yet
    • $7.99
  • Drag and drop me to the cart

    Not rated yet
    • $5.70
  • Drag and drop me to the cart

    Not rated yet
    • $2.95
  • Drag and drop me to the cart

    Not rated yet
    • $5.20
  • Drag and drop me to the cart

    Not rated yet
    • $6.30